Features and Benefits:
-
Works with all 1996 and newer cars & trucks that are OBD II compliant
-
Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTC)
-
Turns off check engine light
-
Supports multiple trouble code requests: generic codes, pending codes and manufacturer specific codes
-
Reads VIN numbers
-
Active Scanning
-
Highly reliable and accurate
-
Easy-to-read crystal-clear backlit 2-line LCD display
-
Easy to use with one plug-in
-
Stand-alone unit with no need for an additional laptop computer to operate
-
Small in size and conveniently fits in your palm
-
Performs continuous DTC scan
-
Safely communicates with the on-board computer
-
No batteries needed-powered via detachable OBD II cable
-
Comes with a code / user manual
FYI: This scanner is not compatible with CAN protocol.
Vehicle Coverage:
This scanner is specifically designed to work with all OBD II compliant vehicles (all 1996 and newer cars & trucks that are OBD II compliant.) Federal Law required, in 1996, that all cars and light trucks, sold in the U.S., must be OBDII equipped.
To see if your car is OBD II compliant, please look at the following two items:
- Locate the 16 Pin OBD II connector. This connector can be found, on most vehicles, under the dashboard of the driver side. Some may be located behind the ashtry.
- Check the Vehicle Emissions Control Information Label, located under the hood or by the RADIATOR on most vehicles. If the vehicle is compliant, the label will designate "OBD II Certified" and will have a 16-pin OBD II Standard Socket.
Easy Operating Steps:
Make sure car is off
Plug the scanner into the cable connector...it should read...Memoscan ME380
Turn the key to the one position, but DO NOT start the engine
Press the Enter Key (which is actually the Select key)
The scanner will start scanning for the correct protocol
Note: If you press the enter key before the key is turned to the on positon, you will receive a linking error message.
Includes:
- OBDII Scanner with Cable
- User / Code Manual - DTC Codes and Descriptions
Supports the following Protocols:
-
SAE J1850 PWM
-
SAE J1850 VPW
-
ISO 9141-2
-
ISO 14230 (KWP2000)
